Küçükarslanlar Bakır Çinko San. ve Tic. A.Ş.

Zinc Plate

  • 27 Mar

    Copper Wire

    Type : Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TS EN 13602, TS EN 1652
    Conductivity : 56 – 58 µs
    Order : Annealed
    Standard and Certificate of Conformity : TS EN 13602, TS EN 1652

    Flat wire is manufactured, completely by our own plants, from electrolytic copper and silver alloyed copper wire rods by use of drawing, rolling or rolling-drawing methods. Our copper rods conforms to TS EN 13602 quality standards.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Copper Rod

    Type : Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TS 435, TS EN 1652
    Conductivity : 56 – 58 µs
    Order : Semi-Annealed, Nose Radius, Whole Radius
    Standard and Certificate of Conformity : TS 435, TS EN 1652

    Being manufactured completely by our own plants, copper busbar, copper rods, copper strip sheet, transmission rods and grounding rods conform to TS 435 and TS EN 13601 quality standards while copper bars can be manufactured in any size. Our copper rods are manufactured by use of Outokumpu drawing system.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Copper Busbar

    Type : Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TS 435, TS EN 1652
    Conductivity : 56 – 58 µs
    Order : Semi-Annealed, Nose Radius, Whole Radius
    Standard and Certificate of Conformity : TS 435, TS EN 1652

    Being manufactured completely by our own plants, copper busbar, copper rods, copper strip sheet, transmission rods and grounding rods conform to TS 435 and TS EN 13601 quality standards while copper bars can be manufactured in any size. Our copper rods are manufactured by use of Outokumpu drawing system.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Flat Wire

    Type : Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TS EN 13602, TS EN 1652
    Conductivity : 56 – 58 µs
    Order : Annealed
    Standard and Certificate of Conformity : TS EN 13602, TS EN 1652

    Flat wire is manufactured, completely by our own plants, from electrolytic copper and silver alloyed copper wire rods by use of drawing, rolling or rolling-drawing methods. Our copper rods conforms to TS EN 13602 quality standards.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Coil Copper Tube

    Type : Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TSE EN 12449
    Conductivity : 56 – 58 µs
    Order : LWC, Pancake
    Standard and Certificate of Conformity : TSE 380

    Being manufactured completely by our own plants, copper tubes are available in coil copper tubes, lwc tubes, pancake tubes etc, conforming to TS 380 quality standards. Copper tube is very efficient particularly in floor heating systems because of its heat conductivity which is a thousand-fold of that of plastic. It is also efficient when used as air conditioner tubes, auto-gas tubes etc.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Copper Tube - Straight

    Type : Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TSE EN 12449
    Conductivity : 56 – 58 µs
    Order : Hard, Semi-Annealed, Annealed
    Standard and Certificate of Conformity : TSE 380

    Draft tubes made of DHP-Cu billets are cold-drawn for two passes in Go & Back Machinery and subjected to tube drawing in Spinner Block machinery for different passes depending on the size of the finished product. They can be manufactured in any size as per order.

    High heat conductivity, low expandability and resistance to pressure make copper tube very efficient particularly for heating systems and as natural gas pipes. Copper is readily used in construction as it is resistant to corrosion.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Copper Plate

    Type : Cu
    Composition : -
    Standard : TS EN 1652
    Conductivity : -
    Order : Hard, Semi-Annealed, Annealed
    Standard and Certificate of Conformity : TS EN 1652

    Copper Plate is manufactured by pouring molten copper into plate moulds, rolling it by rollers and annealing it. It is available for use in electricity industry, roof coverings, grounding etc.
    Grounding plate is manufactured as annealed, semi-hard and hard, in conformance to TSE standards. In addition, our products can be manufactured with custom thicknesses and with custom sizes apart from the standard sizes.
    Click here for the details of our sales outlets or contact us through our liaison offices at Demirciler Industrial Site, in Istanbul and
    Ostim, Ankara.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Copper Tube - Draft

    Type : Cu-DLP, Cu-DHP, Cu-ETP
    Composition : Cu-min. 99,90
    Standard : TSE EN 12449
    Conductivity : 56 – 58 µs
    Order : Straight, Finned
    Standard and Certificate of Conformity : TSE 380

    Draft tubes made of DHP-Cu billets are cold-drawn for two passes in Go & Back Machinery and subjected to tube drawing in Spinner Block machinery for different passes depending on the size of the finished product.
    The finished product is manufactured as straight, coil, Pancake, LWC and PVC coated tubes by Finishing Line, LWC and PVC Coating Lines, respectively. Products are available as annealed or hard as requested by customer. 
    They are used in water heaters, combi boilers, sanitary systems, heating systems etc.

    Click here for Other Products of Usincluding FINIALS, COPPER STRAIGHT TUBE, COPPER PLATE, COPPER CONTACT WIRE, COPPER WIRE AND FLAT WIRE, ZINC PLATE AND LEAD PLATE, COIL COPPER TUBE (LWC & PANCAKE), BRAIDED COPPER WIRE, BRASS (YELLOW) PRODUCTS, DRAFT TUBE.

  • 27 Mar

    Contact Wire

    Type :  
    Composition :  
    Standard :  
    Conductivity :  
    Order :  
    Standard and Certificate of Conformity :  

     

  • 27 Mar

    Finials

    Finial Properties and Sizes

    PAINTED GILDED
    60cm 60cm
    80cm 80cm
    100cm 100cm
    150cm 150cm
    200cm 200cm
    250cm 250cm
    300cm 300cm

     

Page 1 of 2
© Copyright 2019 - Küçükarslanlar Copper Zinc | Manufacturing and Sales of Copper | Copper Busbar, Copper Plate, Zinc Plate, Copper Tube, Copper Wire, Copper Rod, Brass Tube, Brass Plate, Flat Wire